Ty Shaw Ty Shaw's Profile Page

Ty Shaw Ty Shaw

0 Course Enrolled • 0 Course Completed

Biography

N10-009 Intereactive Testing Engine - Latest N10-009 Questions

We all know that the importance of the CompTIA Network+ Certification Exam (N10-009) certification exam has increased. Many people remain unsuccessful in its N10-009 exam because of using invalid N10-009 Practice Test material. If you want to avoid failure and loss of money and time, download actual N10-009 Questions of PremiumVCEDump.

Our customers comment that the N10-009 latest dumps pdf covers most questions of actual test. Most questions in our N10-009 dumps valid will appear in the real test because CompTIA exam prep is created based on the formal test. If you practice the N10-009 Test Questions and remember the key points of study guide, the rate of you pass will reach to 95%.

>> N10-009 Intereactive Testing Engine <<

Latest N10-009 Questions | N10-009 Valid Exam Tutorial

PremiumVCEDump wants to win the trust of CompTIA Network+ Certification Exam (N10-009) exam candidates at any cost. To achieve this objective PremiumVCEDump is offering real, updated, and error-free CompTIA Network+ Certification Exam (N10-009) exam dumps in three different formats. These CompTIA Network+ Certification Exam (N10-009) exam questions formats are PremiumVCEDump CompTIA N10-009 dumps PDF files, desktop practice test software, and web-based practice test software.

CompTIA Network+ Certification Exam Sample Questions (Q329-Q334):

NEW QUESTION # 329
A network engineer is setting up a new VoIP network for a customer. The current network is segmented only for computers and servers. No additional switchports can be used in the new network. Which of the following does the engineer need to do to configure the network correctly? (Select two).

A. Implement a routing protocol
B. Place devices in the perimeter network
C. Change network translation definitions
D. Set up voice VLANs
E. Enable 802.1Q
F. Reconfigure the DNS

Answer: D,E

Explanation:
To support VoIP on a network with limited switchports, the engineer should configure voice VLANs and enable 802.1Q tagging. Voice VLANs allow VoIP traffic to be prioritized and isolated from data traffic even when sharing the same physical port. 802.1Q is used for VLAN tagging, enabling multiple VLANs over a single physical link.
From Andrew Ramdayal's guide:
"Voice VLANs allow IP phones and computers to share the same physical switch port while keeping their traffic separate. 802.1Q is used to tag VLAN traffic so that it can be appropriately routed and prioritized."

NEW QUESTION # 330
A network technician replaced an access layer switch and needs to reconfigure it to allow the connected devices to connect to the correct networks.
INSTRUCTIONS
Click on the appropriate port(s) on Switch 1 and Switch 3 to verify or reconfigure the correct settings:
Ensure each device accesses only its
correctly associated network.
Disable all unused switchports.
. Require fault-tolerant connections
between the switches.
. Only make necessary changes to
complete the above requirements.

Answer:

Explanation:
See the solution below in Explanation.
Explanation:
To provide a complete solution for configuring the access layer switches, let's proceed with the following steps:
* Identify the correct VLANs for each device and port.
* Enable necessary ports and disable unused ports.
* Configure fault-tolerant connections between the switches.
Configuration DetailsSwitch 1Port 1 Configuration (Uplink to Core Switch)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN150, VLAN220 Port 2 Configuration (Uplink to Core Switch)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN150, VLAN220 Port 3 Configuration (Server Connection)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN90 (Servers)
Port 4 Configuration (Server Connection)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN90 (Servers)
Port 5 Configuration (Wired Users and WLAN)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN120, VLAN150
Port 6 Configuration (Wired Users and WLAN)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN120, VLAN150
Port 7 Configuration (Voice and Wired Users)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN220
Port 8 Configuration (Voice, Printers, and Wired Users)
* Status: Enabled
* LACP: Enabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Tagged for VLAN60, VLAN90, VLAN120, VLAN220
Switch 3Port 1 Configuration (Unused)
* Status: Disabled
* LACP: Disabled
Port 2 Configuration (Unused)
* Status: Disabled
* LACP: Disabled
Port 3 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 4 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 5 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 6 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
Port 7 Configuration (Connection to Device)
* Status: Enabled
* LACP: Disabled
* Speed: 1000
* Duplex: Full
* VLAN Configuration: Untagged for VLAN1 (Default)
* Ports 1 and 2 on Switch 1 are configured as trunk ports with VLAN tagging enabled for all necessary VLANs.
* Ports 3 and 4 on Switch 1 are configured for server connections with VLAN 90 untagged.
* Ports 5, 6, 7, and 8 on Switch 1 are configured for devices needing access to multiple VLANs.
* Unused ports on Switch 3 are disabled.
* Ports 3, 4, 5, 6, and 7 on Switch 3 are enabled for default VLAN1.
* Core Switch Ports should be configured as needed for uplinks to Switch 1.
* Ensure LACP is enabled for redundancy on trunk ports between switches.
Summary of ConfigurationsEnsure All Switches and Ports are Configured as per the Requirements:By following these configurations, each device will access only its correctly associated network, unused switch ports will be disabled, and fault-tolerant connections will be established between the switches.

NEW QUESTION # 331
Which of the following is a cost-effective advantage of a split-tunnel VPN?

A. Cloud-based traffic flows outside of the company's network.
B. More bandwidth is required on the company's internet connection.
C. Monitoring detects insecure machines on the company's network.
D. Web traffic is filtered through a web filter.

Answer: A

Explanation:
A split-tunnel VPN allows some traffic to be routed through the VPN while other traffic goes directly to the internet. This setup offers several advantages, with a primary one being cost-effectiveness due to cloud-based traffic not consuming company bandwidth.
Bandwidth Utilization: Split-tunnel VPNs reduce the amount of traffic passing through the company's network, freeing up bandwidth for other uses.
Performance: By allowing internet-bound traffic to bypass the VPN, it can reduce latency and improve the performance for users accessing cloud services directly.
Cost Savings: Reduced load on the company's VPN infrastructure can lead to lower costs in terms of both hardware and bandwidth.
Network Reference:
CompTIA Network+ N10-007 Official Certification Guide: Covers VPN types, including split-tunnel configurations and their advantages.
Cisco Networking Academy: Discusses VPN technologies and the benefits of split-tunneling.
Network+ Certification All-in-One Exam Guide: Provides detailed information on VPN setups, including the cost-effectiveness of split-tunnel VPNs.
By allowing cloud-based traffic to flow outside the company's network, a split-tunnel VPN optimizes resource usage and enhances the overall network performance without incurring extra costs for bandwidth.

NEW QUESTION # 332
A company is hosting a secure that requires all connections to the server to be encrypted. A junior administrator needs to harded the web server. The following ports on the web server. The following ports on the web server are open:

Which of the following ports should be disabled?

A. 0
B. 1
C. 2
D. 3

Answer: C

Explanation:
For a web server that requires all connections to be encrypted, port 80 (HTTP) should be disabled. Port 80 is used for unencrypted web traffic, whereas port 443 is used for HTTPS, which provides encrypted communication.
* Port 80 (HTTP): This port is used for unsecured web traffic. Disabling this port ensures that all web traffic must use HTTPS, which encrypts the data in transit.
* Port 443 (HTTPS): This port is used for secure web traffic via SSL/TLS encryption. Keeping this port open ensures that secure connections can be made to the web server.
* Other Ports:
* Port 22: Used for SSH, providing secure remote access and file transfers.
* Port 587: Used for secure email submission (SMTP) with encryption.
Network References:
* CompTIA Network+ N10-007 Official Certification Guide: Discusses the roles and security implications of various ports and protocols.
* Cisco Networking Academy: Provides training on secure web server configuration and port management.
* Network+ Certification All-in-One Exam Guide: Covers port security and best practices for securing web servers.

NEW QUESTION # 333
Which of the following must be implemented to securely connect a company's headquarters with a branch location?

A. Split-tunnel VPN
B. Site-to-site VPN
C. Clientless VPN
D. Full-tunnel VPN

Answer: B

Explanation:
Site-to-Site VPN: A site-to-site VPN is used to securely connect two networks, such as a company's headquarters and a branch location, over the internet. This type of VPN creates a secure tunnel for data transmission, ensuring confidentiality and integrity.
Split-tunnel VPN (A): Allows some traffic to bypass the VPN tunnel, which may not secure all communications.
Clientless VPN (B): Used for individual users to access the network without VPN client software.
Full-tunnel VPN (C): Typically used for individual user traffic rather than connecting two networks.

NEW QUESTION # 334
......

The CompTIA N10-009 certification exam is one of the top rated career advancement certification exams in the market. This CompTIA Network+ Certification Exam (N10-009) exam is designed to prove candidates' skills and knowledge levels. By doing this the CompTIA N10-009 certificate holders can gain multiple personal and professional benefits. These benefits assist the N10-009 Exam holder to pursue a rewarding career in the highly competitive market and achieve their career objectives in a short time period.

Latest N10-009 Questions: https://www.premiumvcedump.com/CompTIA/valid-N10-009-premium-vce-exam-dumps.html

CompTIA N10-009 Intereactive Testing Engine It's not easy to become better, CompTIA N10-009 Intereactive Testing Engine What was your original intention of choosing a product, If you are one of these students, then Latest N10-009 Questions - CompTIA Network+ Certification Exam exam tests are your best choice, CompTIA N10-009 Intereactive Testing Engine You must have the feeling also, so do not take actions you will fall behind the others, Our CompTIA Network+ Certification Exam (N10-009) exam dumps comes in three formats: CompTIA N10-009 PDF dumps file, desktop-based practice test software, and a web-based practice exam.

Addressing Inefficient Means of Document Collaboration with N10-009 Valid Exam Tutorial SharePoint Document Libraries, Evaluating and making recommendations on purchase and utilization of software products.

It's not easy to become better, What was your original intention N10-009 of choosing a product, If you are one of these students, then CompTIA Network+ Certification Exam exam tests are your best choice.

Trusted N10-009 Intereactive Testing Engine & Leader in Qualification Exams & Valid Latest N10-009 Questions

You must have the feeling also, so do not take actions you will fall behind the others, Our CompTIA Network+ Certification Exam (N10-009) exam dumps comes in three formats: CompTIA N10-009 PDF dumps file, desktop-based practice test software, and a web-based practice exam.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Ty Shaw Ty Shaw

Biography

COOKIE NOTICE